Air gun accessories include the supporting equipment used with compatible air rifles and air pistols for recreational shooting, target practice, competition, training, maintenance, transport, and storage. Because airguns use several different power systems, calibers, magazine designs, pressure ratings, and mounting interfaces, accessory compatibility should always be confirmed for the exact manufacturer and model.

Air Gun Accessories

Airgun accessory categories can include magazines, rotary clips, pellet holders, optics, scope mounts, sights, PCP fill equipment, hand pumps, compressors, hoses, fill probes, CO2 cartridges, cases, targets, cleaning supplies, replacement seals, and other manufacturer-approved equipment.

Choosing Air Gun Accessories

• Exact Model: Match accessories to the exact air rifle or air pistol model whenever compatibility is model-specific.
• Power System: Determine whether the airgun uses PCP, CO2, pneumatic, spring-piston, gas-piston, or another system.
• Caliber: Verify pellet, magazine, barrel-accessory, and storage products match the correct caliber.
• Pressure Rating: PCP hoses, pumps, tanks, gauges, fittings, and adapters must be rated for the manufacturer's specified pressure range.
• Mounting Interface: Check dovetail width, Picatinny rail, proprietary mounting points, thread specifications, and other interface details.

Air Gun Magazines

Repeating air rifles and pistols may use rotary magazines, stick magazines, cylinders, clips, or manufacturer-specific feed systems. Capacity and compatibility vary by caliber, model, and product generation.

Rotary Magazines

Rotary magazines are common on PCP rifles and selected air pistols. Magazine diameter, indexing method, projectile length, caliber, and capacity are model-specific.

Air Pistol Magazines

CO2 and replica-style air pistols may use detachable stick magazines, BB magazines, rotary clips, or integrated CO2 and projectile assemblies.

Pellet Clips

Some airguns use removable pellet clips rather than conventional magazines. Clip dimensions and capacity must match the exact model.

Spare Magazines

Spare magazines can provide additional convenience for compatible repeating airguns. Verify the manufacturer part number before purchasing.

Magazine Capacity

Capacity varies according to caliber, magazine geometry, projectile length, and airgun design.

Pellets

Airgun pellets are available in several calibers, weights, shapes, and materials. Use only projectiles compatible with the exact airgun and manufacturer specifications.

.177 Pellets

.177 caliber pellets are widely available for compatible target, training, recreational, and competition airguns.

.22 Pellets

.22 caliber pellets are offered in numerous weights and styles for compatible rifles and pistols.

.25 Pellets

.25 caliber pellets are commonly associated with selected PCP and other larger-caliber air rifles.

Other Airgun Calibers

Larger and specialty airgun calibers are available from selected manufacturers. Projectile dimensions and magazine compatibility should be verified carefully.

Diabolo Pellets

Diabolo pellets are a common airgun projectile design and are available in several head shapes, weights, and materials.

Airgun Slugs

Selected PCP rifles are designed for compatible airgun slugs. Barrel, magazine, caliber, projectile length, and manufacturer compatibility should be verified.

Lead-Free Pellets

Lead-free airgun projectiles are available for compatible rifles and pistols and may differ in weight and dimensions from traditional lead pellets.

BBs

Steel BBs and other BB-type airgun projectiles should be used only in products specifically designed for them.

Pellet Storage

Pellet tins, holders, pouches, trays, and organizers can help keep airgun ammunition clean, dry, and protected from damage.

Air Gun Scopes

Scopes intended for compatible airguns are available in numerous magnification ranges, objective sizes, reticles, and mounting configurations.

Airgun-Rated Optics

Some airgun operating systems can impose different mechanical stresses than conventional firearms. Optic compatibility should be confirmed with the scope manufacturer.

Red-Dot Sights

Compatible red-dot sights may be used on air rifles and pistols equipped with an appropriate rail or mounting interface.

Target Sights

Competition airguns may use aperture sights, globe front sights, adjustable rear sights, or other discipline-specific target sight systems.

Fiber-Optic Sights

Replacement or factory-compatible fiber-optic sights may be available for selected recreational air rifles and pistols.

Dovetail Scope Mounts

Many airguns use receiver dovetails for compatible scope rings and sight mounts. Dovetail dimensions should be verified before purchasing.

Picatinny Scope Mounts

Modern PCP and other airguns may use Picatinny-compatible rails for optics and accessories.

Scope Rings

Ring diameter, mounting interface, height, material, and optic clearance should match both the scope and airgun.

Mount Height

Optic mount height influences clearance, cheek position, and overall sight alignment. Compatibility should be based on the complete airgun and optic combination.

PCP Fill Equipment

Pre-charged pneumatic airguns require compatible high-pressure air equipment that meets the manufacturer-specified pressure, filtration, fitting, and connection requirements.

PCP Hand Pumps

High-pressure hand pumps are available for selected PCP airguns. Maximum pressure, hose, gauge, moisture filtration, and fitting compatibility should be checked before use.

PCP Compressors

Airgun compressors vary by maximum working pressure, cooling method, duty cycle, power source, filtration, hose configuration, and connection system.

Portable PCP Compressors

Compact compressors are available for compatible airgun systems. Power requirements, operating limits, cooling procedures, and maximum fill pressure vary by model.

High-Pressure Air Tanks

External high-pressure tanks can supply compatible PCP airguns when the tank, regulator, hose, fittings, and pressure ratings meet the manufacturer's requirements.

Carbon-Fiber Air Tanks

Composite high-pressure cylinders are available for selected PCP applications. Rated pressure, service life, inspection requirements, fittings, and handling procedures must be followed.

Aluminum Air Tanks

Aluminum pressure cylinders may be used with compatible filling systems where their pressure rating and fittings are suitable.

PCP Fill Hoses

High-pressure fill hoses must be rated for the operating pressure and use compatible connections at both the air source and airgun.

Fill Probes

PCP fill probes are often model-specific and should be matched by manufacturer part number or exact specification.

Quick-Connect Fittings

Quick-connect fittings are common in PCP equipment but are not automatically interchangeable across every manufacturer or pressure system.

Threaded Fill Adapters

Threaded adapters vary by size, thread form, seal type, and pressure rating. Exact compatibility is essential.

Pressure Gauges

Pressure gauges may be integrated into airguns, pumps, compressors, fill assemblies, or external tanks. Gauge range should match the intended pressure system.

Moisture Filters

Selected PCP fill systems use moisture or particulate filtration. Filter type, maintenance interval, and compatibility depend on the compressor or pump.

Bleed Valves

High-pressure fill systems may incorporate manufacturer-designed bleed valves or pressure-release controls. Operation should follow the equipment manufacturer's instructions.

PCP Pressure Ratings

Never exceed the airgun, tank, hose, fitting, adapter, gauge, or compressor manufacturer's maximum rated pressure.

PCP Cylinder Inspection

High-pressure cylinders should be inspected and serviced according to manufacturer requirements and any applicable testing standards.

Damaged Pressure Equipment

Tanks, hoses, fittings, gauges, or airgun reservoirs showing damage, corrosion, leakage, or other concerns should not be used until evaluated according to manufacturer guidance.

CO2 Cartridges

CO2-powered airguns require cartridges or cylinders of the exact size and type specified by the manufacturer.

CO2 Accessories

Compatible cartridge holders, seals, adapters, tools, and other manufacturer-approved accessories may be available for selected CO2 airguns.

CO2 Storage

CO2 cartridges should be protected from excessive heat, puncture, physical damage, and other conditions prohibited by the manufacturer.

CO2 Temperature Limits

CO2 pressure changes with temperature. Follow all manufacturer operating, transport, and storage temperature recommendations.

Air Gun Cases

Hard and soft cases are available for air rifles, air pistols, optics, magazines, filling equipment, and accessories.

Air Rifle Cases

Rifle cases should be sized around the complete airgun, including optics, stock configuration, moderator or barrel shroud where factory installed, and other accessories.

Air Pistol Cases

Pistol cases can provide organized storage for the air pistol, magazines, pellets, CO2 cartridges, optics, and related equipment.

Hard Cases

Hard cases provide a rigid outer shell and may include foam or molded interiors.

Soft Cases

Soft cases are available in different lengths and configurations for compatible recreational and sporting airguns.

Air Gun Cleaning Supplies

Cleaning rods, pull-through systems, patches, brushes, cloths, and manufacturer-approved lubricants may be used where appropriate for the exact airgun.

Airgun Lubricants

Airguns can require specialized lubricants for seals, springs, pistons, O-rings, and other components. Use only products approved for the exact power system.

Seal Lubricants

Pneumatic and CO2 seals may require materials compatible with the manufacturer's seal composition and pressure system.

Cleaning Pellets

Selected manufacturers offer cleaning products intended for compatible airgun barrels. Follow the airgun manufacturer's recommendations before use.

Barrel Cleaning Equipment

Cleaning equipment should match the airgun caliber and barrel construction and should not damage crowns, rifling, seals, or other components.

Replacement Seals

O-rings, valve seals, breech seals, and other pressure components can be specific to a particular model or generation.

O-Ring Kits

Replacement O-ring kits should match the exact manufacturer model, material specification, and pressure system.

Spare Parts

Replacement parts should be sourced according to manufacturer part numbers and installed or serviced as directed by the manufacturer.

Airgun Targets

Paper targets, target holders, reactive targets, and other target products are available for suitable airgun shooting environments.

Paper Targets

Paper targets are widely used for recreational practice, competition, sight-in work, and training.

Target Holders

Target holders should be appropriate for the airgun, projectile, range environment, and manufacturer's intended use.

Pellet Traps

Pellet traps are designed for particular projectile types and energy ranges. Always verify the manufacturer's rating before use.

Reactive Targets

Reactive airgun targets should be used only within their manufacturer-specified projectile and energy limits.

Backstops

Any target environment should use an appropriate backstop designed for the projectile and energy involved and should comply with range or property requirements.

Chronographs

Airgun-compatible chronographs and measurement equipment may be used to evaluate manufacturer-relevant performance data within appropriate testing conditions.

Shooting Rests

Benches, rests, bags, and other shooting supports may be used for target and sporting applications when appropriate for the airgun.

Bipods

Compatible bipods may attach to rails, studs, or other manufacturer-supported mounting points on selected air rifles.

Slings

Slings and swivels may be compatible with air rifles equipped with appropriate factory attachment points.

Sling Swivels

Swivel style, stud dimensions, rail interface, and attachment method should match the exact air rifle.

Airgun Stock Accessories

Selected airguns support cheekpieces, buttpads, spacers, grips, or manufacturer-approved stock components.

Adjustable Buttplates

Competition-oriented air rifles and pistols may use adjustable buttplates or grip components within manufacturer and competition rules.

Cheekpieces

Replacement or adjustable cheekpieces may be model-specific and should match the stock or chassis system.

Air Gun Tool Kits

Tool kits may include manufacturer-approved wrenches, probes, adjustment tools, or other service accessories intended for compatible products.

Manufacturer-Supplied Tools

Specialty tools supplied with an airgun or accessory should be used only for their intended manufacturer-defined purpose.

Storage Accessories

Pellet organizers, magazine cases, pump bags, hose storage, protective caps, and equipment cases can help keep airgun systems organized and protected.

Protective Caps

Dust caps and protective covers can help keep compatible fill ports, fittings, threads, and connectors clean during storage.

Air Gun Maintenance

Accessory maintenance depends on the product. Pumps, compressors, magazines, optics, seals, hoses, tanks, and other components each have their own manufacturer service requirements.

Pressure-System Maintenance

PCP equipment should receive periodic inspection for leaks, corrosion, damaged hoses, worn seals, gauge condition, and fitting integrity according to manufacturer guidance.

Compressor Maintenance

Compressor maintenance may involve filtration, cooling, lubrication, moisture management, and other manufacturer-specified service.

Hand Pump Maintenance

High-pressure hand pumps may require seal inspection, filtration service, lubrication, or other maintenance specified by the manufacturer.

Magazine Maintenance

Magazines and rotary clips should be kept clean and free from deformation or debris and maintained according to manufacturer instructions.

Optic Maintenance

Scope lenses, red-dot sights, mounts, batteries, and adjustment mechanisms should be maintained using the optic manufacturer's guidance.

Safe Pressure Equipment Storage

Compressed-air cylinders, pumps, hoses, compressors, and fittings should be stored securely and protected from heat, impact, corrosion, and unauthorized use.

Airgun Accessories Are Model-Specific

Products that appear visually similar can use different magazines, fill probes, thread specifications, seals, mounts, pressure ratings, or other interfaces.

Do Not Assume Compatibility

A matching caliber or similar appearance does not guarantee that an accessory will fit or function with a particular airgun.

Manufacturer Part Numbers

Manufacturer part numbers are one of the best ways to distinguish magazines, seals, fittings, mounts, and replacement components intended for specific models.

High-Pressure Equipment Safety

PCP systems operate at substantial pressure. Tanks, hoses, fittings, pumps, compressors, gauges, and reservoirs should never be used beyond their rated pressure or contrary to manufacturer instructions.

Airgun Safety

Airguns can cause serious injury or death. Accessories should be used only in ways consistent with the airgun and accessory manufacturers' instructions.

Eye Protection

Appropriate eye protection should be used during airgun shooting and when working around pressurized equipment where recommended.

Storage Around Children

Airguns, pellets, BBs, CO2 cartridges, pressure equipment, and accessories should be secured against unauthorized access.

Local Airgun Regulations

Local laws may regulate airgun possession, discharge, transport, or use even where accessories themselves are unrestricted.

Shipping Restrictions

CO2 cartridges, compressed-gas cylinders, batteries, lubricants, and other accessories may have carrier or destination restrictions.

Air Travel

Airlines and transportation authorities may impose separate rules for airguns, CO2 cartridges, pressure vessels, batteries, tools, and other accessories.

Competition Requirements

Formal airgun disciplines may regulate sights, grips, stocks, cylinders, dimensions, weights, clothing, rests, and other accessories.

Hunting Accessories

Airgun hunting regulations may affect allowable projectile types, calibers, equipment, and accessories. Review current wildlife rules for the specific hunt.

Compare Exact Model, SKU & UPC

Air gun accessories with similar names may differ by caliber, magazine capacity, rail interface, thread specification, pressure rating, fill fitting, hose connection, tank size, optic dimensions, battery type, seal material, included hardware, or manufacturer package. Verify the exact model number, SKU, UPC, and current specifications before ordering.

Always Verify Manufacturer Specifications

Airgun accessory compatibility, caliber, pressure rating, thread specification, magazine fit, mount interface, battery requirement, fill connection, dimensions, materials, maintenance procedures, and included components vary by manufacturer and model. Always review the current specifications for the exact airgun and accessory being considered.